Osculator Note Pitch Bend Output
new in this forum =)
I am rebuilding the App AC-7 Core for iPad, and i used a Midi Monitor Software to see what the App transmits to Reason(5) that i can rebuild the commands for TouchOsc.
i found everything i need, the only problem i have are the faders.
AC-7 Core uses Pitch Wheel, in different channels (1-8) to control the faders (1-8) in a mixer in reason.
first of all, the TouchOsc Editor doesnt support in the midi section Pitch Bend, or am i blind?
so i want to go over OSC and Osculator, to transform the OSC in a Pitch Bend.
in Osculator i choose for the fader Midi Note as Event type, and Pitch Bend as Value.
when i change the fader in TouchOSC , the fader in Reason is moving, but its just struggeling to a maximum value of 2 ( 127 would be full).
i found out with the Midi Monitor software, that Osculator gives not the pitch bend out, like a real pitch wheel does.
i cant describe it in english, i am german :/
the output gives only a range from -8192 to -7937 !!!!
is this a failure of the Pitch Bend output from Osculator or am i doing something wrong?
here som screens that you dont have to get all information out of my bad english
i hope i described not tooo complicated and you can help me....
try and error since 2 days -.-
Thank you very much for these detailed report.
This was a bug in OSCulator 2.11-beta23, and I just uploaded a new build.
Please download it here.
why didnt i noticed by myself...
a few weeks ago it worked, and since the beta it doesnt....xDD
Thank you =)
I was curious if this worked, I'm struggling getting Reason working too, do you have any other data you might share on what the AC-7 is doing, I thought it was emulating the Mackie Control.
Last edited by Byter; 12-16-2011 at 03:48 AM.
i dont know what exactly AC-7 is doing, but you can get the Mac-Software Midi Monitor, it will show you all ways of midi-interfaces that are connected and if you change a control it shows you which channel and value and so on it is....
Tags for this Thread