User Tools

Site Tools


manual:latched_and_toggle_enable

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

manual:latched_and_toggle_enable [2009/06/04 02:07] (current)
camille created
Line 1: Line 1:
 +====== Latched & Toggle Enable ======
 +
 +The Latched and Toggle Enable events are Meta Events. ​ They are named like this because they are events used to control the state of the application.
 +
 +Depending of the input value, these events will enable or disable the input for the messages set as targets.
 +
 +For example, you can imagine that you want to deactivate only the acceleration sensors of the Wiimote with the press of a button. ​ The button would be configured with a ''​Latched Enable''​ or ''​Toggle Enable''​ event with an acceleration parameter (e.g. pitch) as a value.
 +
 +If the button has a '​latched'​ enable event, then pressing the button will invert the state of the target, and releasing the button will revert the action back to its previous state.
 +
 +If the button has a '​toggled'​ enable event, then pressing the button will invert the state of the target, but it will take a release and another press to revert it to its previous state.
  
manual/latched_and_toggle_enable.txt ยท Last modified: 2009/06/04 02:07 by camille