OSCulator Wiki

User Tools

Site Tools

Trace:
tutorial:3

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
tutorial:3 [2010/05/11 00:15] – camilletutorial:3 [2010/05/11 00:17] – camille
Line 16: Line 16:
  
 You will need to have TouchOSC and OSCulator correctly setup with Live [[tutorial:1:start|as explained in this tutorial]]. You will need to have TouchOSC and OSCulator correctly setup with Live [[tutorial:1:start|as explained in this tutorial]].
 +
 +You can download the files used here at the end of this tutorial, however it is highly recommended to start from scratch and follow the instructions step by step.
  
  
Line 73: Line 75:
  
 ===== Further notes ===== ===== Further notes =====
 +
 +You can download the setup files of this tutorial {{:tutorial:touchosc_live_leds_project.zip|here}}.  If you want to use these files, you will have to change the OSC Routings' target host to your phone's IP address or network host name, or it won't work.
  
 It should be noted that the LEDs will not blink with a very precise timing, which can be disappointing. It should be noted that the LEDs will not blink with a very precise timing, which can be disappointing.
tutorial/3.txt · Last modified: 2010/05/11 00:24 by camille