User Tools

Site Tools


tutorial:3

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revision Both sides next revision
tutorial:3 [2010/05/11 00:15]
camille
tutorial:3 [2010/05/11 00:19]
camille
Line 1: Line 1:
 ====== How to control TouchOSC LEDs with Ableton Live and OSCulator ====== ====== How to control TouchOSC LEDs with Ableton Live and OSCulator ======
  
-TouchOSC features a LED control that can display an on/​off ​style information.  This control can not be touched, ​however ​it can be controlled with OSC messages.+TouchOSC features a control that displays a stylized ​on/​off ​LED.  This control can not be touched, ​but it can be controlled with OSC messages.  The purpose of this tutorial is to explain how to control these LEDs from Ableton Live.
  
-In the Beatmachine default layout, page 2, there are 16 LED controls.  They can be activated by sending an OSC message like:+You can see those LEDs in the Beatmachine default layout, ​on page 2, there are 16 of them.  They can be activated by sending an OSC message like:
  
     ''/​2/​led3 1.0'' ​  ... will turn the third LED on     ''/​2/​led3 1.0'' ​  ... will turn the third LED on
Line 16: Line 16:
  
 You will need to have TouchOSC and OSCulator correctly setup with Live [[tutorial:​1:​start|as explained in this tutorial]]. You will need to have TouchOSC and OSCulator correctly setup with Live [[tutorial:​1:​start|as explained in this tutorial]].
 +
 +You can download the files used here at the end of this tutorial, however it is highly recommended to start from scratch and follow the instructions step by step.
  
  
Line 73: Line 75:
  
 ===== Further notes ===== ===== Further notes =====
 +
 +You can download the setup files of this tutorial {{:​tutorial:​touchosc_live_leds_project.zip|here}}. ​ If you want to use these files, you will have to change the OSC Routings'​ target host to your phone'​s IP address or network host name, or it won't work.
  
 It should be noted that the LEDs will not blink with a very precise timing, which can be disappointing. It should be noted that the LEDs will not blink with a very precise timing, which can be disappointing.
Line 78: Line 82:
  
 I hope this is something Rob((the author of TouchOSC) can fix in a future release of his great software! I hope this is something Rob((the author of TouchOSC) can fix in a future release of his great software!
- 
tutorial/3.txt ยท Last modified: 2010/05/11 00:24 by camille